Metal Stain Remover

Product Description

  • Removes existing metal stains
  • Phosphate-free formula
  • Ideal for salt system pools


Before using this product make sure the pool water is properly balanced. Calcium Hardness and Total Alkalinity should be in proper ranges (check with your pool professional).

  1. Adjust pH to 7.4
  2. Circulate pool for 1 hour, then turn pump off and allow water to become still.
  3. Sprinkle product into pool water over main spotted areas. Use 1lb for every 10,000 gallons.
  4. Let sit for 1 hour, then turn pump on.
  5. Let pump run for 24 hours and retest Total Alkalinity, pH and Calcium Hardness. Balance water if necessary.

Note: Following Metal Stain Remover treatment, apply SeaKlear Metal Klear to complete the stain removal process.